Category
- Programming Service
- Accessories
- Antennas
- Antenna Tuners
- Cel-Fi Coverage Enhancement
- Dash Cams
- Electrical
- Satellite Communicators & GPS Trackers
- Marine VHF & MF/HF SSB
- Merchandise
- Network / LTE
- Rental Services
- RF Power Amplifiers
- Scanners / Receivers
- X-Demo & Used
- Transceivers
Icom AH-705 AUTOMATIC ANTENNA TUNER
$610.00 Original price was: $610.00.$510.00Current price is: $510.00. Inc. GST
In stock (can be backordered)
Description
- Covers the 1.8 MHz to 50 MHz bands
30 m, 98.4 ft or longer antenna: 1.8 – 54 MHz, 7 m, 23 ft or longer antenna: 3.5 – 54 MHz
* Depending on operating conditions or environments, the tuner may not be able to tune the antenna.
- SO-239 antenna connector for 50 Ω antenna such as dipole or Yagi
- “Terminal connector”, binding post socket adapter supplied for a long wire antenna
- 2-way power sources using alkaline batteries or external 13.8 V DC*
- 13.8 V DC should be taken directly from an external power supply, not through the IC-705.
- IP54 dust-protection and water resistance construction*
- The connectors should be covered with an adhesive tape or a jack cover to prevent water seeping into the connection.
- Full automatic tuning, just push the [TUNER] button on the IC-705
- Latching relays used for saving power consumption
- 190 × 105 × 40 mm; 7.5 × 4.1 × 1.6 in, 450 g; 15.8 oz* compact design
* Battery cells are not included.
Specifications
Tunable frequency range | 1.8 – 54 MHz (with a 30 m, 98.4 ft or longer wire antenna) 3.5 – 54 MHz (with a 7 m, 23 ft or longer wire antenna) |
---|---|
Maximum input power | 10 W |
Input impedance | 50 Ω |
Power requirement for tuning | 5 W, 10 W |
Tuning time (approximate) | Average: 2 – 3 seconds Maximum: 15 seconds |
Power supply requirement | Battery: 3.0 V DC (LR6 (AA) alkaline × 2 cells) DC Input: 13.8 V DC (±15%) |
Current drain | Less than 300 mA (at tuning) Less than 1 mA (stand-by) |
Electric polarity | Negative ground |
Operating temperature range | –10°C to +60°C, 14°F to +140°F |
Tuning accuracy | Less than 1: 2.0 VSWR (except λ/2 of antenna length and its multiples) |
Number of tuned memories | 45 memories |
Dimensions (W × H × D) (projections not included) | 190 × 105 × 40 mm; 7.5 × 4.1 × 1.6 in |
Weight (approximate) | 450 g, 15.8 oz (battery cells are not included) |
Supplied Accessories
- Coaxial cable (2 m, 6.6 ft, BNC connectors, between AH-705 and IC-705)
- Control cable (2 m, 6.6 ft, between AH-705 and IC-705)
- Terminal connector, PL-259 to binding post socket adapter for a long wire antenna*
- Mounting bracket (with a screw and washer)
- DC plug
* PL-259 plug is supplied for Europe version, instead of Terminal connector.
Related
Weight | 1.5 kg |
---|---|
Dimensions | 40 × 30 × 15 cm |
Related products
-
Mobileone 27MHz Full size 1/4 Wave Mobile Antennas
Select options This product has multiple variants. The options may be chosen on the product page27MHz 1/4 wave stainless steel whip. Also can be used for other HF bands with a suitable antenna tuner (ATU). 2700mm Length Base fitting 1/2″ BSW Frequency Factory Set Bandwidth 1.9MHz Max Power 2Kw Antenna comes in the following Kits. DX9S, Whip only DX9SKIT1: Whip, SAMS Base, SSL Spring & 3.6m RG58 terminated with PL259 …
-
BNCA BARRETT USB TO DB25 PROGRAMMING CABLE
$42.50 Inc. GSTAdd to cartThe BNCA Barrett USB to DB25 programming cable is a great alternative to the OEM cable kit. Using the FTDI Chip to give RS232 levels required for programming the transceiver. Compatible with: 950 2050 OS supported: Windows 7, 8, 8.1, 10, 11. x86 – x64. Diver @ ftdichip.com * May not work with Some DOS …
-
Sale!
BNCA CODAN USB to TRS PROGRAMMING CABLE
$39.95Original price was: $39.95.$32.00Current price is: $32.00. Inc. GSTAdd to cartThe BNCA Codan USB to TRS programming cable is a great replacement for the OEM cable at an affordable price. Using the FTDI Chip it provides RS232 signals required. NGT 9313 9480 9105/X2 with Jenal selcall mic fitted System requirements: Windows 7, 8, 8.1, 10 & 11 (x86/x64). Diver @ ftdichip.com