Category
- Programming Service
- Accessories
- Antennas
- Antenna Tuners
- Cel-Fi Coverage Enhancement
- Dash Cams
- Electrical
- Satellite Communicators & GPS Trackers
- Marine VHF & MF/HF SSB
- Merchandise
- Network / LTE
- Rental Services
- RF Power Amplifiers
- Scanners / Receivers
- X-Demo & Used
- Transceivers
AH-730 AUTOMATIC ANTENNA TUNER 1.8 to 50MHz
$915.00
- NZD: $997.84
Icom AH-730 ATU, Replacing Icom AH-4.
In stock (can be backordered)
Building on the AH-4 quality the AH-730 is replacing the AH-4.
Description
Wide Frequency Coverage
With a 7 m (23 ft) or longer wire element, all band matching is possible from the 1.8 MHz (160 m) band to the 50 MHz (6 m) band. Efficient for multi-band operation.
* A ground connection is required.
High Speed Tuning
The automatic tuning operation can be made at a high speed of about 2 to 3 seconds. It has 45 memories to store the minimum SWR settings. When re-tuning the same frequency, matching can be achieved in about 1 second.
Minimum RF Output for Tuning
The AH-730 emits only 0.3 W of RF output from the antenna during tuning operation. The low power minimizes the risk of interference to other stations while matching the antenna.
IPX4 Water Resistant
The tuner case uses a high-strength resin which protects internal parts from water, weather, and salt damage. The tuner is tested to IPX4 water splash protection. In addition, the coaxial cable and control cable can be easily connected without opening the case.
Specifications
General
- Frequency range: 1.8 ~ 54 MHz (with an antenna longer than 7 m, 23 ft) or (3.5 ~ 54 MHz with the AH-2b – 2.5m, 8.20 ft)
- Maximum input power: 150 W
- Input impedance: 50 Ω
- Tuning power required: 5 ~ 15 watts
- Rated voltage: 13.8 V DC ±15%
(current less than 0.7 A) - Usable temperature range:
–10°C ~ +60°C
(+14°F ~ +140°F) - VSWR: 2.0 : 1 or less (except antennas a one-half wave or multiple of a
one half wave in length) - Weight (approximate): 2.5 kg (5.5 lb)
- Dimensions: 230 (W) × 80 (H) × 340 (D) mm,
(projections not included) 9.1 (W) × 3.1 (H) × 13.4 (D) inches
All stated specifications are subject to change without notice or obligation.
Applicable IP Rating
Ingress Protection Standard Data | |
---|---|
IP rating | IPX4 (Water resistant) |
Supplied Accessories
- OPC-1465 Control cable (10 m, 32.8 ft)
- Mounting kit (U-bolts and plates)
- Weatherproof cap
Dimensions
Related
Weight | 3.5 kg |
---|---|
Dimensions | 45 × 28 × 20 cm |
Related products
-
BNCA BARRETT USB TO DB25 PROGRAMMING CABLE
$42.50- NZD: $46.35
Add to cartThe BNCA Barrett USB to DB25 programming cable is a great alternative to the OEM cable kit. Using the FTDI Chip to give RS232 levels required for programming the transceiver. Compatible with: 950 2050 OS supported: Windows 7, 8, 8.1, 10, 11. x86 – x64. Diver @ ftdichip.com * May not work with Some DOS …